Plato Industry (M) Sdn Bhd
Lot 142, Batu 11 1/2,
Jalan Kota Tinggi,
81800 Ulu Tiram,
Johor, Malaysia.
+607-899 1199
+607-899 1188

PVC Decking Membrane

PlaSafe PVC Decking Membrane is a polyester reinforced, multi-layer, synthetic and mechanically fastened roof waterproofing sheet based on polyvinyl chloride (PVC) with UV resistant and fire retardant. With various colors and patterns, PlaSafe PVC Decking Membranes are specifically designed for use as waterproof walking surfaces on decks, patios, roof decks or wherever an attractive durable waterproof surface is required. The fact that these products serve as waterproofing materials makes the installation extremely important. PlaSafe membranes must be installed with waterproofing and roofing procedures in mind, and only by fully qualified PlaSafe Applicators. The PlaSafe system of proven details and practices take the guess work out of waterproof deck applications. 

PlaSafe PVC Decking Membrane has varieties of colour and design, product type and specification to suit your needs.

Product Types and Specifications : 
Product Wall Floor
Thickness 1.53mm 2.0mm
Width 1.83M 2.6M
Roll Length 20M 20M


Jute Grey

Jute Tan

  
  

Marble Grey

Siltstone Grey

Pebblestone

Sahara Light Grey

Plank Grey

Beechwood Grey

Oak Grey

Plank Tan

Product Installation Guidelines : 

1. PlaSafe PVC Decking membrane is a polyester reinforced, multi-layer, synthetic and mechanically fastened roof waterproofing sheet based on polyvinyl chloride (PVC) with UV resistant and fire retardant. With various colors and patterns, PlaSafe PVC Decking Membranes are specifically designed for use as waterproof walking surfaces on decks, patios, roof decks or wherever an attractive durable waterproof surface is required. The fact that these products serve as waterproofing materials makes the installation extremely important. PlaSafe membranes must be installed with waterproofing and roofing procedures in mind, and only by fully qualified PlaSafe Applicators. The PlaSafe system of proven details and practices take the guess work out of waterproof deck applications.
2.PlaSafe membranes are extended up the wall of the building, behind the cladding for proper overlap and flow of moisture away from the building.
3. Door sills are wrapped up all sides with the PlaSafe membrane to ensure a completely waterproof door sill detail. The door is sealed to the sill upon installation
4. The PlaSafe membrane is wrapped over the outside edge, and mechanically fastened in place with the PlaSafe ‘U-Bar’ or metal bean mechanical fastener.
5. The PlaSafe membrane is wrapped over the outside edge and heat welded in place with the PlaSafe ‘L-Fix’ mechanical fastener.
6. For an Inside wall corner, the PlaSafe membrane is folded onto itself and heat welded in place to form a neat corner with no cuts in the membrane
7. The PlaSafe membrane is cut to continue around an outside wall corner, and an additional pc of membrane is fitted over the existing membrane and heat welded in place
8. The PlaSafe membrane is cut to continue around an outside wall corner, and an additional pc of membrane is fitted over the existing membrane and heat welded in place
9. The PlaSafe membrane is cut to continue around an outside wall corner, and an additional pc of membrane is fitted over the existing membrane and heat welded in place

   
   


Switch to Mobile Version